iZiFi AC HD(XD4200)

iZiFi AC HD(XD4200)

The Enterprise-Grade High Perfomance WiFi 5 802.11ac Wave 2 Access Point, especially
designed for the Indoor Envionments deployment with High-Throughput-Demand.




Ideal Use Cases

Performance-critical wireless LANs.

Recommend for High-density coverage.

Operation Management

Support flexible mode FIT(Wlan Controller Member) and FAT(Stand Alone AP)

Central-provisioning from Wlan Controller.

Self configuration one by one AP via WEB GUI.

Support flexible network mode operation: AP, AP Router, WDS Wireless Link, ISP Client.

Hardware Features

2 radios: 2.4 GHz, 5 GHz, Dual-Band.

802.11N, 802.11AC Wave2 1200Mbps.

2 × 1 Gbps Ethernet port (WAN, LAN).

PoE: 802.3at.

Suport 12Volt DC input.

Wire Network Optimization

Support Multi 4SSID/Vlan tag per radio.

MAC ACL in the FAT mode.

Router support DHCP Server and Bandwidth QOS in FAT Mode.

Router support port forwarding and DMZ.

Monitor and track statement of the online client devices.

Wlan Network Optimization

In FAT Mode, Auto channel selection by AP self in the Passive.

In FIT Mode, Auto channel provision from the Cental Wlan Controller with flexible mode Passive and Active.

Radios optimized for rate-vs-range performance.

Built-in real-time RF spectrum view in FAT mode.

Wlan Controller-based automatic roaming assistant(Client’s match decision).

Support Band Steering Prefer 5Ghz.

Support Fast Roaming 802.11k,v,r

Device management

Create device-specific firewall rules

Schedule reboot system.

Schedule on/off Wlan Radio WiFi.

Central Firmware Management or Direct Firmware Upgrading

Local syslog.


Model  XD4200
802.11 Standard 802.11 A/N/AC 5.8Ghz
Data Rate 1200Mbps
Antenna Integrated 2×2:2 Antenna
With 5 dBi
Transmit Power High
Beamwidth 360°
Chanel Bandwidth 20/40/80 Mhz
Network Interface (2) x 10/1000 Mbps Ethernet Ports
Power Method 802.3af/at PoE

48V Passive PoE (Pairs 4,5+ & 7,8-)

12V 1.5A DC Jack

Features Wireless AP, WDS Client

Multiple 4 SSID

Wlan Security: Open, WPA/WPA2-PSK

RF Optimization configuration

IPV4 Static, DHCP Client

System Firmware, backup restore configuration

System time zone

FIT MODE: Wlan Controller (CAPWAP)

Max Power Consumption <13W
Concurrent Connection 250+
Concurrent Users 120
Assistant Interface (1)   Switch to change the operation mode

(AP or WDS Client mode)

(1) Reset button, press 15 seconds for default setting

LEDs  1 Power, 1 WAN, 1 LAN and

4 Wi-Fi Signal Strength LEDs

ESD/EMP Protection Contact Discharge: ±6KV

Air Discharge: ±8KV

RF Power 802.11a: 54M 17±2DB, 6M 20±2DB

802.11n HT20: MCS7 16±2DB, MCS0 19±2DB

802.11n HT40: MCS7 16±2DB, MCS0 19±2DB

802.11ac HT80: MCS9 14±2DB, MCS0 17±2DB

Receive Sensitivity 802.11a:-74dbm@54Mbps; -90dbm@6Mbps

802.11n HT20: -70dbm@MCS7,-88dbm@MCS0

802.11n HT40: -68dbm@MCS7,-86dbm@MCS0

802.11ac HT80: -55dbm@MCS9,-80dbm@MCS0

Dimensions 237mm x 79.1mm x 56.1mm
Environment Operating Temperature: -30~55 ℃ Max Operating

Temperature: -40~70 ℃ (Throughput lower)

Storage Temperature: -40~70 ℃

Humidity: 5%~95% non-condensing

Management Firmware GUI ,Remote Management (CAPWAP)





Download DataSheet Guide: iZiFi-Converting FIT-FAT Mode 


2000+ people have put their trust in IZIFI, How about you?